Very Naked!

Previous | Home | Next

I'm really into it now!

Here the passing lamps, headlight, and all are hanging by their wiring. I can't completely remove them or the handlebars until the wiring harness is pulled forward to expose the wiring connectors. I'm just not ready to remove the rear fender to release the wiring harness just yet. The fork brace and the left fork tube have been completely removed, the right fork is temporarily clamped in a lower position in order to remove to cap. So far, everything has been easy and there have been no surprises. Less than one hour has transpired since rolling the bike into the garage.

Dissassembly of the fork tubes/sliders is really easy. There's only about 1" of spring pre-load; easily contained by hand without the use of special tools.